Product Description
Baxter H93847 – Pin Dispensing Exacta Med 50/CS
EXACTAMED Dispensing Pin, Sheathed Plastic with 3 Micron Filtered Vent (hydrophobic, olephobic)
Dispensing Pin
EXACTAMED Dispensing Pin, Sheathed Plastic with 3 Micron Filtered Vent (hydrophobic, olephobic). Sterile.
- For adding or withdrawing solutions from a vial
- Efficiently vents the vial and forms a tight seal
- Hydrophobic filter cap over vent
- Ideal for vented additions and/or withdrawals of fluid from multidose vials
- Molded plastic spike with filtered vent, sheath and dust cap
- Eliminate risk of air being drawn into solution – prevents air bubbles from being aspirated back into the syringe; with offset air inlet, it lets air in above the fluid
- Pin housing and screw caps are made out of acrylonitrile butadiene styrene; Sheath is made out of polyvinyl chloride; vent assembly housing is made out of polypropylene with a 3 micron acrylic copolymer membrane – hydrophobic and oleophobic vent
- Sterile and non-pyrogenic in unopened, undamaged package
Device Characteristics
| What MRI safety information does the labeling contain? | Labeling does not contain MRI Safety Information |
| Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437): | No |
| Device labeled as “Not made with natural rubber latex”: | Yes |
| For Single-Use: | Yes |
| Prescription Use (Rx): | No |
| Over the Counter (OTC): | No |
| Kit: | No |
| Combination Product: | No |
| Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P): | No |
Sterilization
| Device Packaged as Sterile: | Yes |
| Requires Sterilization Prior to Use: | No |
Product Specifications
| Manufacturer | Baxter |
| Manufacturer No. | H93847 |
| Brand | Exactamed |
| Application | Dispensing Pin |
| Latex | Not Made with Natural Rubber Latex |
Packing Information
| Length | 10 IN |
| Width | 4 IN |
| Height | 4 IN |
| Volume | 0.09 FC |
| Weight | 1 LB |
| Pack Factor | 50 |
Reviews
There are no reviews yet